Fire/Arson Investigations : Fire/Arson Investigations
A place to ask questions and add to probative and informative discussions associated with the various aspects of the field of fire investigation. -- FORUM RULES---BE CIVIL AND NO NAME CALLING, NO BELITTLING, NO BERATING, NO DENIGRATING others. Postings in violation of these rules can be removed or editted to remove the offending remarks at the discretion of the moderators and/or site administrator.
Re: What to do
Posted by:
Nick Markowitz (IP Logged)
Date: April 16, 2007 06:45AM
I would check with the manufactuer and AGA to make sure the flu assembly was properly designed. Modern furnaces require different set ups than older units.
especailly if this furnace is a 80% efficent unit and not a 99% efficent unit
there were many problems with flues on the 80% units damaging flues.
Modern furnaces are not to be put into old chimmney assemblys unless a stainless steel furnace liner is installed.
There are also problems with hot water tanks and modern furnaces being combined into same chase as well.
Sorry, only registered users may post in this forum.