A place to ask questions and add to probative and informative discussions associated with the various aspects of the field of fire investigation. -- FORUM RULES---BE CIVIL AND NO NAME CALLING, NO BELITTLING, NO BERATING, NO DENIGRATING others. Postings in violation of these rules can be removed or editted to remove the offending remarks at the discretion of the moderators and/or site administrator.
Re: Myth or Fact
Posted by:
dcarpenter (IP Logged)
Date: October 25, 2018 08:34PM
Can you provide a reference to the scientific study? While not related to this topic, I would be interested in reading this paper.
I do not believe that it is the expansion of the liquid in the bulb that results in the bulb failure. If you look closely at the bulb, there is a relatively small air bubble in the liquid. The volume of this bubble is carefully calibrated to achieve the desired activation temperature. Again, fundamental knowledge applied to the glass bulb would show that the thermal expansion coefficient is significantly different for liquids than for gasses. The expansion in volume of the air bubble causes an increase in pressure in the liquid.
The pressure inside the glass bulb will be uniform. The stress in the glass will not be uniform due to concentrations of stress based on the geometry of the glass. At the ends of the glass bulb where in contact with the cap and the frame arm, there will be stress concentrations where the bulb will break first.
Again, the first test of the hypotheses would be to test whether the cleaning agents or methods will produce scratches in the surface of the glass.
Douglas J. Carpenter, MScFPE, CFEI, PE, FSFPE
Vice President & Principal Engineer
Combustion Science & Engineering, Inc.
8940 Old Annapolis Road, Suite L
Columbia, MD 21045
(410) 884-3266
(410) 884-3267 (fax)
www.csefire.com